Servos are powered by the ESC’s output to the receiver. If you’re using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience ‘brown-outs’ where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Total Height (A) = 44mm
- Body Width (B) = 41mm
- Below Mount (C) = 28mm
- Above Mount (D) = 16mm
- Total Length (E) = 55.5mm
- Total Width (F) = 20mm
Specifications
| Servo | |
|---|---|
| Servo Size: | Standard |
| Servo Spline Count: | 25 |
| Waterproof Casing: | Yes |
| Gear Material: | Plastic |
| Torque kg/cm: | 6 |
| Case Material: | Plastic |
| Rotational Degrees: | 120o (Normal) |
| “A” Measurement: | 44 |
| “B” Measurement: | 41 |
| “C” Measurement: | 28 |
| “D” Measurement: | 16 |
| “E” Measurement: | 55.5 |
| “F” Measurement: | 20 |











Reviews
There are no reviews yet.